IFB Washing Machine Errors Codes Lists [ With Solutions ]
IFB washing machines are highly advanced but sometimes show errors. Learn about IFB washing machine error codes, their reasons and solutions, and whether they can be fixed at home or need professional service. Read now!
Key Learning Points:
IFB is a globally recognized electronics and home appliance brand that manufactures the best quality products. IFB washing machines are very popular and sold in huge numbers.
Though IFB washing machines are very powerful and technically perfect, they also show errors sometimes, and it is common because nothing is perfect in this world. Now there can be many reasons why your IFB washing machine is showing errors, but the interesting thing is you can easily know why they are showing errors.
IFB washing machines are highly advanced; thus, they automatically detect errors and show an error code. This error code is very important to know the issue, and it also helps in solving that issue. Here in this blog, we will discuss the complete IFB top load washing machine error code list, its reason, and its solution. Now some of these IFB Washing Machine Error Codes can be fixed on your own, while some need professional service.
IFB Washing Machine Error Codes
| Error Codes | Reason | Solution |
|---|---|---|
| E01 | Door not closed or opened properly | Check the door and close/open it properly |
| E02 | Water supply issues (e.g. closed water tap, low water pressure, blockage in water inlet) | Check the water supply, ensure no damage or blockage in the water inlet, hose, etc. |
| E03 | Electrical loosening (e.g. loose wiring, loose electrical plugs, damage in plugs or circuit boards) | Call a technician; do not change plugs or wiring on your own |
| E04 | Machine restart after 30 minutes; may be caused by overloading | Wait for 30 minutes; remove clothes and start again or wait for automatic restart |
| E05 | Low voltage or low inlet water temperature | Wait until program is over or adequate voltage supply is achieved |
| E06 | Blocked coin trap or issues with exhaust pipe (e.g. damaged or clogged) | Clean coin trap; clean exhaust pipe on your own and call professional service if pipe is damaged |
| rın5 HOLd | Rinse process holding | Press Start/pause button and start drain program |
| dLEr | Washing machine door doesn’t open automatically | Plug out machine and wait for some time; switch it on again and the machine will open the door automatically; call a professional technician if issue remains |
| dLAY | Reminder for Delay Start Mode | Wait until machine starts automatically |
| door | Washing machine issues related to the door | Call a professional technician |
| tAP | The error is related to the water supply and tells you that machine is not receiving water. | Try to open the tap properly and make sure the water pressure is high |
| dPEr | The error is related to the drain | Clean the drain and filter properly |
| tACO/trC | This error occurs when the door is not closed properly and every time something stucks in between | Turn Off the machine and wait for a few minutes. You need to drain the water and to do so, On the machine and start the drain program |
| HEAt | The water temperature goes above 60 degrees, the error occurs | Turn Off the machine, wait for 60 seconds atleast, and then restart it |
| OFEr / Pr5 | Most probably, it occurs due to some technical error | trying some basic solutions like Turning Off the machine, waiting for some time |
| UnbL | Unbalanced condition that occurs due to an undistributed/unbalanced load | Solve this issue by evenly distributing the load |
| ACHı | This error occurs in case of high voltage fluctuations | You have to wait, and the machine will start automatically when the voltage goes down |
| ACLo | When there are low voltage fluctuations | Wait till voltage exceeds the required voltage |
| H260 | Too high voltage | Wait till voltage goes down the desired range |
| L175 | Low input voltage | machine will restart once the voltage increases |
Here is the IFB front load washing machine error code list. You can solve most of them on your own otherwise, get a service from a Washing machine service centre in Kolkata.
Error Code 1E01
Reason
This is the first and the most common error related to door closing and opening. In simple words, if you do not open or close the door properly, the machine will show an E01 error.
Solution
The solution to this error code is very simple and doesn’t require any expertise. Just check the door and close/open it properly, and the machine will automatically stop showing this error.
Error Code 2 E02
Reason
This is also a very common error you will face almost daily. This error is related to water supply, and you will face this frequently. Possible reasons for this error code are a closed water tap, low water pressure, blockage in the water inlet, etc.
Solution
You can easily solve this issue, and you don’t have to worry much. All you have to do is just check the water supply. Make sure the water supply is smooth and high. Also, ensure there is no damage or blockage in the water inlet, hose, etc. Try cleaning the water inlet hose regularly.
Error Code 3 E03
Reason
The E series codes are very common issues that do not require any professional. The third error code of the E series is related to electrical loosening. Any issue related to electrical loosening will impact the functioning of your washing machine. Some possible reasons are loose wiring, loose electrical plugs, damage in plugs or circuit boards, etc.
Solution
Well, these issues are common it is advisable to call a technician. It is not advisable to change the plugs or wiring of the machine. However, if plugs are not fitted in the circuit well, you can re-plug them. If your circuit boards are not working properly, then also you have to call an electrician.
Error Code 4 E04
Reason
Another common error you face is E04, but this error can trouble you a lot. The reason behind this error is the restart. Sometimes it occurs due to your choice, but when this error occurs, you have to wait for 30 minutes. Sometimes this error occurs due to overloading, and the machine is delayed for 30 minutes.
Solution
There is no solution to this error. Just wait, and after 30 minutes, the machine will restart again. When this error happens due to overloading, you know what to do. Remove clothes and start again or wait 30 minutes for the automatic restart.
Error Code 5 E05
Reason
This error is also very common, but it is somewhat technical. The reason for this issue is low voltage. Now every machine requires a specific voltage to function properly, and if this voltage is lower than the specific range, your machine will show an E05 error. This also results in low inlet water temperature, and thus it is another possible reason behind this error.
Solution
There is nothing in your hand when this error occurs. Just wait until the program gets over or an adequate voltage supply is achieved.
Error Code 6 E06
Reason
The last error code of the E series is E06, and it can cause serious trouble if not given attention. The reason for this error is blocked coin ta rap. Blocked coin. A blockade is a very common issue, and that’s why you will see this error frequently. Another reason behind this error is issued with the exhaust pipe. Whether it can be damaged or clogged, it can erupt this error code.
Solution
Cleaning the coin trap is the best solution to get rid of this error code. In case of exhaust pipe issues, try to clean it on your own, and call professional service in case of the damaged pipe.
Suggested Read: Find authorized IFB washing machine showrooms in Kolkata
rın5 HOLd
Reason
After reading this error code, you can easily understand what it means. It simply means the Rinse process has been holding. This error code is just a reminder to tell you to perform specific actions to start the rinse process.
Solution
To eliminate this error, you have two options: press the Start/pause button and start the drain program. So the solution to this error is very simple, and this error will not trouble you as it is not related to any technical issue.
dLEr
Reason
You will find this error very irritating, and it can also cause damage to the machine if the proper solution is not used. The error occurs when the washing machine’s door doesn’t open automatically. In modern machines, the door opens automatically after a wash cycle, but in some cases, the door doesn’t open.
Solution
As mentioned, if you do not use the proper solution, it can damage the machine, so never open the door forcefully. Plug out the machine and wait for some time. Switch it on again, and the machine will open the door automatically, and if the issue remains active, you need a professional technician. Contact All India Service Centre, we are a trusted washing machine service centre in Kolkata since 2011.
dLAY
Reason
Like rın5 HOLd, the dLAY error code is also a reminder to tell you about Delay Start Made. When you press Delay Start Mode, the machine will display dLAY.It is not an error, so you don’t have to worry, but yes, your machine will not work for some time.
Solution
As this is not an error, it is obvious there is no solution. The machine will automatically start after a specific time duration. Until then, just relax.
door
Reason
This is one of the simplest and most common errors. As the name implies, the error is related to the washing machine door, and you can imagine what the error is about. Yes, you thought it right; the error occurs when you don’t close the door properly.
Solution
The solution to this error is very simple to close the door properly. If some clothes are blocking the door, distribute them properly or take some clothes out.
tAP
Reason
This error can also be understood by its name. The error is related to the water supply and tells you that machine is not receiving water. Now without water, how a washing machine can perform? Some possible reasons are a closed tap, slow water pressure, blocked or damaged water inlet hose, filter, etc.
Solution
You can easily solve this issue instantly but checking the water supply to the machine. Try to open the tap properly and make sure the water pressure is high; otherwise, wait for a high-pressure water supply. In case of a blocked filter or hose, clean it, and if it is damaged, get it replaced by professional service.
dPEr
Reason
The error is related to the drain, and thus, it impacts the functioning of the machine. Usually, it occurs due to a clogged drain and filter.
Solution
To solve this issue, clean the drain and filter properly, and the error will be solved. You can also restart the drain program, and it works many times.
Suggested Read: Do we need stabilizer for washing machine? Find out the answer.
tACO/trC
Reason
This issue is also related to door closing. It means this error occurs when the door is not closed properly and every time something stucks in between. And if the door is not closed, your machine properly will not work.
Solution
To solve this process, you have to be patient. Firstly Turn Off the machine and wait for a few minutes. You need to drain the water and to do so, On the machine and start the drain program. Now you are ready to arrange and distribute the stuff properly. Once again, start the process, and the error will be removed.
HEAt
Reason
You can easily understand what the HEAt error code means. When the water temperature goes above 60 degrees, the error occurs. High temperature is not good for the machine’s health, and that’s why the machine shows this error.
Solution
To solve this error, wait for some time, so the water temperature goes below 60 degrees. After checking the temperature, you can start the program. It is advised to Turn Off the machine, wait for 60 seconds atleast, and then restart it. If the error remains the same, call for professional service.
OFEr / Pr5
Reason
Well, the cause of this error is unknown, but most probably, it occurs due to some technical error.
Solution
The solution to this error is also unknown, but trying some basic solutions like Turning Off the machine, waiting for some minutes, and restarting it may solve this issue.
UnbL
Reason
UnbL signifies an unbalanced condition that occurs due to an undistributed/unbalanced load. The machine must be filled with an optimum load, meaning it doesn’t have very little or a very high load. Similarly, the load must be distributed properly.
Solution
Everyone can solve this issue by evenly distributing the load. In case of a heavy load, try to remove some clothes, and in case of less load, add some clothes.
ACHı
Reason
This error occurs in case of high voltage fluctuations. A higher voltage can damage the machine, and thus the machine stops working after the voltage crosses the sade operation level voltage.
Solution
The solution to this error is not in your hands. You have to wait, and the machine will start automatically when the voltage goes down.
ACLo
Reason
This error is similar to the above one; the difference is it occurs when there are low voltage fluctuations. Like high voltages, low voltages can also damage the machine, so in this case, the also machine stops working.
Solution
In this case, also you can’t do anything. The machine will start automatically after the voltage exceeds the required voltage.
H260
Reason
The reason for this error is too high voltage. In this voltage, your machine can be damaged completely.
Solution
There is no manual solution to this error because the machine starts automatically when the voltage goes down the desired range.
L175
Reason
The error is similar to the above. The cause of this error is the low input voltage and once this error occurs machine stops working.
Solution
The solution to this problem is not in your hands. The machine will restart once the voltage increases.
Suggested Read: Find solutions for your washing machine sound problem.
What are the 4 blinks of error in the IFB washing machine?
4 blinks of error or light blinking four times is nothing but the E04 error code, which occurs due to overloading. When you load more stuff than required, it becomes difficult for the machine to reach maximum RPM while balancing the load. Reduce the load, and this error will be eliminated.
Conclusion
IFB Washing Machine Error Codes are the best way to know the issue, its cause, and possible solution. These error codes also remind you of the manual mistakes you have made while operating the machine.
After reading this blog, you easily understand what the error is all about and how to solve it by your own. If you can’t solve the issue, just go for professional service.